Typical application: Oxy-Klenza™ is a powerful alkaline cleaner (typically pH 9-11) for tough, dried-in stains and soiling, including grease, mold, algae and leaf marks. It is safe for use on natural stone, tile, masonry, concrete, grout, vinyl and unfinished wood.

Benefits: Oxy-Klenza™ is a powder concentrate that goes further and is safer to transport / store. It also disinfects and breaks down odors. Oxy-Klenza™ is biodegradable – decomposing into oxygen, water and natural salts.

Application rate: Typical usage rate of 2/3 of a standard cup Oxy-Klenza™ per 100 sq.ft. (10 sq.m.), depending on surface conditions.

How to use:

Method One:

  1. TEST PRODUCT ON A SMALL AREA BEFORE FULL APPLICATION.
  2. If satisfied with test results; for heavy cleaning prepare product by stirring 2/3 of a standard cup of Oxy-Klenza™ into a plastic bucket filled with 2 ½ Gallons (10 litres) of clean warm water until it dissolves.
  3. For light cleaning prepare product by stirring 1/3 of a standard cup of Oxy-Klenza™ into a plastic bucket filled with 2 ½ Gallons (10 litres) of clean warm water until it dissolves.
  4. Apply solution generously with a mop or plastic watering can and leave for 5 to 15 minutes. Do not allow solution to dry on surface (large areas can be cleaned in sections). Use a mop or sponge to clean the surface. Heavily soiled areas should be gently scrubbed with a soft brush.
  5. Typical usage rate of 2/3 standard cup Oxy-Klenza™ per 200 sq.ft. (20 sq.m.), depending on surface conditions.
  6. Repeat application if required.
  7. Rinse surface thoroughly with clean water.

Method Two:

  1. TEST PRODUCT ON A SMALL AREA BEFORE FULL APPLICATION.
  2. If satisfied with test results, prepare surface for full application by sweeping or vacuuming all loose dust and dirt from the surface.
  3. Thoroughly wet the surface with water. Large areas should be cleaned in sections.
  4. Lightly sprinkle Oxy-Klenza™ onto the wet surface and leave for 5 to 15 minutes. Do not allow solution to dry on surface. Use a mop or sponge to clean the surface. Heavily soiled areas should be gently scrubbed with a soft brush. Excess powder will dissolve by scrubbing.
  5. Typical usage rate is one cup Oxy-Klenza™ per 100 sq.ft. (10 sq.m.), depending on surface conditions.
  6. Repeat application if required.
  7. Rinse surface thoroughly with clean water.

Advanced tips:

  1. Oxy-Klenza™ can be mixed into a paste with a little water and used to create a poultice, which removes deep stains from countertops. Refer to the Poultice Cleaning Method guide for details.
  2. Oxy-Klenza™ can be used to disinfect artificial turf.
  3. Oxy-Klenza™ qualifies for LEED 2009 IEQ Credit 3.3: Green Cleaning - Purchase of Sub-stainable Cleaning Products and Materials 1 Point. 

Precautions:

  1. Do not take internally.
  2. Apply when surface temperature is between 40 – 95 °F (5 – 35 °C).
  3. Protect surrounding areas and clothing from product contact. Avoid contact with metals.
  4. Keep away from plants, water and soil.
  5. Once mixed, solution should NOT be left in a sealed container. It will continue to give off oxygen and the container may rupture and cause damage.
  6. Dispose of all unused solution after 4 hours by pouring into a drain or toilet.
  7. Wear suitable solvent resistant gloves, protective clothing and safety goggles during application.
  8. Wash hands thoroughly after applying.

Pack size: 2.2 lb (1 kg) and 22 lb (10 kg) plastic container.